OREANDA-NEWS. July 04, 2012. TDK Corporation developed two new FOUP* load port models (the TAS450 Type A2 and the TAS300 Type J1) for a semiconductor production equipment. Sales of both models will begin in July 2012.

An environment with a high degree of cleanliness is essential for state-of-the-art semiconductor device manufacturing processes, but this requires massive capital investment for large-scale air cleaning and other equipment. To control such capital investment, in recent years, automated transport systems that deliver semiconductor substrates (wafers) to completely sealed pods (FOUP) and shift the wafers between semiconductor production equipment have become the mainstream production method.

Summaries of the two new FOUP load port models that TDK developed and will launch are set forth below.

1. TAS450 Type A2
New model supports next-generation 450 mm wafers and controls particles at the industry’s highest levels.
Main features

This product is the first state-of-the-art transport system for semiconductor production that can accommodate the large-diameter 450 mm silicon wafers that are expected to be a next-generation technology in the semiconductor industry.
 Key features of this product are an innovation applied to the opening and closing door that prevents particles from entering the semiconductor production equipment from outside during wafer input and output and prevention of the generation of particles from the load port itself.
2. TAS300 Type J1
New model achieves lighter weight and higher speed in the industry’s highest level and seeks enhanced cost competitiveness.
Main features

This product is a wafer transport system for 300 mm diameter wafers, which are currently used in manufacturing in the semiconductor industry, and was developed to provide higher cost competitiveness. The TAS300 Type J1 is the successor model to the Type H1 series introduced in 2009, and the overall weight of the load port has been reduced by half. In addition, door opening and closing for wafer input and output is approximately 40% faster than the H1 series. Like the TAS450 Type A2, an innovative door is used to prevent the generation and introduction of particles.
Glossary
FOUP: A semiconductor wafer delivery pod standardized by SEMI, an industry organization for semiconductor production equipment makers.
Main applications
Automated transport of silicon wafers between semiconductor production equipment.